DESCRIPTION:

Also called continuous cooking as it enables us to cook at the same time as we are heating. These are the ovens where the product is cooked in an independent and airtight chamber, respect to the fire and gas chambers. The cooking base or hearth rotates and therefore the whole product passes in front of the loading and unloading door. This provides even cooking and is more convenient for the person in charge of handling it.

CHARACTERISTICS:

The construction of the Oven is mixed, that is, 25% is comprised of metal components (cooking and gas chambers, structures, accessories and transmission system); and 75% masonry (furnace or hearth, fire chamber). We can highlight the genuine "FARJAS" robustly built fire chamber, with tongue-jointed brick casing on the 4 sides. The cooking floor of the platform or hearth is also worth special mention, made of natural (stone) refractory monolith . The "in situ" installation must be carried out by specialised people. The later maintenance is reduced to cleaning the fire and gas chambers and greasing the transmission system.

FUEL:

The fuel to be used is preferably firewood or dry wood (beech, oak, olive, etc.) although adapting a suitable burner, liquid fuel (gas-oil) or gaseous fuel (natural gas, propane) can be used.

DIMENSIONS:

The working cooking dimensions vary from 2.25 to 4.50 Æ hearth. Working height: 2.40 m. Outer diameter: 1.00 m. more than the hearth Æ. Local minimum height: 2.80 m. some models may exceed 30,000 kilos in weight.

  Most normal measurements

 

PLATFORM DIAMETER

2,25 M.

2,50 M.

3,00 M.

3,50 M.

 

WORKING COOKING SURFACE

3,98 M²

4,90 M²

7,06 M²

9,62 M²

 

OUTSIDE DIAMETER

3,25 M.

3,50 M.

4,00 M.

4,50 M.

 

LOCAL MINIMUM HEIGHT

2,80 M.

2,80 M. 2,80 M. 2,80 M.

 

SEA CONTAINER

20'

20'

20'

40'

 

LOAD ON TRUCK

TRAILER

 

FLOOR RESISTANCE

1.800 KGS./M²

 

OTHER PLATFORM MEASUREMENTS

2,75 - 3,25 - 3,75 - 4,00 - 4,25 - 4,50

MODELS:

"RUSTIC"

 
With double masonry façade, original and genuine "FARJAS" system. Made with outside brick and rustic arch, which hides the steam outlet, which collects the excess fumes from the cooking chamber thus avoiding condensation in the premises. On the other hand, the outside contour is made of metal plates lacquered with enamel.

"METAL"
With the stainless steel façade and the outer contour of plates lacquered with enamel. The decoration of the façade and the outer contour with brick, can be carried out by the purchaser on his account. You must also notify us before sending the Oven, to make the necessary modifications.
 
Comercial Farjas, S.L. -Fábrica de Hornos de pan y maquinaria- 
Crta. Castellón km.4. - Pol. Ind. La Unión, nave 12. Tel: (+34) 976 41 00 00. Fax (+34) 976 41 76 04.- E-mail: farjas@farjas.com 50720 ZARAGOZA España